Curiosity Mars Rover Wheels Wearing Faster Than Anticipated

Rover Wheels

12.20.2013
Left-Front Wheel of Curiosity Rover, Approaching Three Miles
The left-front wheel of NASA’s Curiosity Mars rover shows dents and holes in this image taken during the 469th Martian day, or sol, of the rover’s work on Mars (Nov. 30, 2013). The image was taken by the Mars Hand Lens Imager (MAHLI) camera, which is mounted at the end of Curiosity’s robotic arm. By that sol, Curiosity had driven 2.78 miles (4.47 kilometers). An uptick in the pace of wear and tear on the rover’s wheels in the preceding few weeks appears to be correlated with driving over rougher terrain than during earlier months of the mission. Routes to future destinations for the mission may be charted to lessen the amount of travel over such rough terrain.
Image Credit: NASA/JPL-Caltech/MSSS

Curiosity Mars Rover has traveled about three miles so far. Just like any car on Earth you expect some wear and tear on the tires. Now that it has completed a software upgrade engineers are going to take a closer look at the tires to see how they are faring as it travels the red planet.

“We want to take a full inventory of the condition of the wheels,” said Jim Erickson of NASA’s Jet Propulsion Laboratory, project manager for the NASA Mars Science Laboratory Project, which operates Curiosity.. “Dents and holes were anticipated, but the amount of wear appears to have accelerated in the past month or so. It appears to be correlated with driving over rougher terrain. The wheels can sustain significant damage without impairing the rover’s ability to drive. However, we would like to understand the impact that this terrain type has on the wheels, to help with planning future drives.”

Curiosity’s recent driving has crossed an area that has numerous sharp rocks embedded in the ground. Routes to future destinations for the mission may be charted to lessen the amount of travel over such rough terrain, compared to smoother ground nearby.

“Curiosity is now operating on version 11 of its flight software,”  This is the third upgrade version since Curiosity’s landing on Mars16 months ago. Completing the switch from version 10 took about a week. An earlier switch to version 11 prompted an unintended reboot on Nov. 7 and a return to version 10, but the latest transition went smoothly.

These upgrades allow continued advances in the rover’s capabilities. For example, version 11 brings expanded capability for using the Curiosity’s robotic arm while the vehicle is on slopes. It also improves flexibility for storing information overnight to use in resuming autonomous driving on a second day.

An upcoming activity will be driving to a relatively smooth patch of ground to take a set of images of Curiosity’s aluminum wheels, using the Mars Hand Lens Imager (MAHLI) camera at the end of the rover’s arm.

NASA’s Mars Science Laboratory Project is using Curiosity inside Gale Crater to assess ancient habitable environments and major changes in Martian environmental conditions. JPL, a division of the California Institute of Technology in Pasadena, built the rover and manages the project for NASA’s Science Mission Directorate in Washington.